5 Ways of Fixing the “Preparing Automatic Repair” Loop in Windows 10

Avatar photo
how to fix automatic repair in windows 10

The straight update or reset of the computer is the recommended Windows response for Preparing Automatic Repair. Here’s how the fix goes: Press the power button three times while the Preparing Automatic Repair window is open to force the computer to shut down. Once the system has restarted, it will request maintenance.

The Windows Automatic Repair loop problem has baffled a lot of Windows 10 customers. Because to corrupted system files, Windows is unable to start up properly. The result is that the machine reboots and freezes repeatedly.

The root source of the issue, a patch for it, and what to do if you can’t boot into Windows at all are all covered in this article. Let’s get going.

What Causes the “Preparing Automatic Repair” Loop on Windows 10?

Your computer typically displays the “preparing automated repair windows 10 stuck” prompt if an issue results in an unplanned shutdown. For instance, Windows 10 will try to automatically repair the damaged files at the next boot if an issue caused your system to crash.

This repair isn’t always able to be done. Your computer gets stuck on the screen with no progress or system repairs when it can’t enter automatic repair mode. The computer can be turned off and restarted, but it never advances past the “Preparing automatic repair” screen.

Despite its seriousness, this is a typical Windows mistake that can be seen on Windows 10, Windows 11, Windows 8.1, Windows 8, and even Windows 7. These issues, mistakes, and circumstances are a few of the potential reasons for this error:

  • Registries on Windows have problems (wrong keys, missing keys, etc.)
  • Damage to the Windows Boot Manager’s files (BOOTMGR)
  • Missing or corrupt system files, which are frequently caused by malware infestations
  • Hardware driver problems, such as missing or out-of-date drivers
  • Other unidentified systems causes
  • No matter what the issue is, you may solve it by using the step-by-step instructions below. Let’s examine each of them individually.

Related: How to Delete an Instagram Account on Android Permanently 2022!

Method 1. Perform a Hard Reboot

Try forcing your computer to shut down and try a power cycle before you start troubleshooting with more sophisticated techniques. This is how:

  1. By hitting the Power button, you can completely turn off your computer. When the computer is turned off, the screen becomes completely dark and the computer fans stop moving.
  2. Disconnect any external devices, including hard drives, headphones, USB flash drives, and so forth. Additionally, take out your computer’s power cable or adapter.
  3. If your laptop has a detachable battery, take the battery out of the battery compartment.
  4. Press and hold the Power button for about 30 seconds to remove any remaining charge from the capacitors.
  5. Reconnect the power line to your computer and put the battery back in your laptop if you had previously taken it out. However, hold off on plugging any of the USB gadgets back in just yet.
  6. Press the Power button repeatedly until the boot screen appears to start your computer. Now you may check to see if Windows 10’s “Preparing automatic repair” screen issue has been fixed.

Try the following fixes if the aforementioned tactic doesn’t work.

Method 2. Boot Your Computer in Safe Mode

Going into Safe Mode may be helpful if you’ve been having problems with loops with Automatic Repair in Windows 10 and your machine crashes when it tries to start up.

Start by verifying whether or not this issue occurs in Safe Mode (as opposed to normal boot mode). With Safe Mode activated, you can troubleshoot more effectively if you don’t get stuck in a loop.

  1. When your computer boots up, hold down the F8 key on your keyboard to access the Windows Recovery Environment (WinRE). You might also need to keep holding down the Fn (function) key on some devices.
  2. Click through to View more sophisticated repair options Restart by selecting Troubleshoot > Advanced settings > Startup Settings.

Fixing the "Preparing Automatic Repair" Loop in Windows 10

3. You will now be presented with a number of restart options. You can start your computer in Safe Mode with Networking by hitting F5 on your keyboard. Watch for your computer to restart, then check to see if it boots properly.

You can continue troubleshooting if Windows 10 starts in Safe Mode without displaying the “Preparing automated repair” prompt. For instance, using Windows Defender to scan your computer for malware is an excellent first step.

Method 3. Rebuild BCD with the Command Prompt

Your boot files being missing or damaged is one of the frequent causes of the “Preparing automated repair” loop. Some users will afterward rebuild crucial components of the system by following the steps below.

Note: In the procedures that follow, we’ll assume that you can’t even start your computer in Safe Mode. You can find the Command Prompt under the taskbar, though, if you have access to your desktop.

  1. When your computer boots up, hold down the F8 key on your keyboard to access the Windows Recovery Environment (WinRE). You might also need to keep holding down the Fn (function) key on some devices.
  2. After choosing Repair Your Computer from the options, select Troubleshoot.
  3. On the screen will be a variety of advanced settings. Just choose Command Prompt from this menu, then wait for it to load. A black pop-up window ought should appear on the screen.

Fixing the "Preparing Automatic Repair" Loop in Windows 10

4. Using the Enter key on your keyboard, enter each of the following commands one at a time:
bootrec /fixmbr
bootrec /fixboot
bootrec /scanos
bootrec /rebuildbcd

5. You’ll see the “Successfully scanned Windows installations” message show up when the repair process is complete. Type exit and press Enter to quit the Command Prompt.

6. Check to see if you can get beyond the repair screen when your machine boots up by restarting it.

Method 4. Disable Automatic Repair at Boot

If you believe your Windows 10 installation to be in good working order, you might consider turning off the Automatic Startup Repair option. This ought to enable you to launch Windows without starting the repair process and becoming locked there.

Please remember that this approach will only be effective if your system is usable outside of the starting repair screen. This section of the tutorial won’t help you troubleshoot if a genuine system fault is occurring.

  1. When your computer boots up, hold down the F8 key on your keyboard to access the Windows Recovery Environment (WinRE). You might also need to keep holding down the Fn (function) key on some devices.
    After choosing Repair Your Computer from the options, select Troubleshoot.
  2. On the screen will be a variety of advanced settings. Just choose Command Prompt from this menu, then wait for it to load. A black pop-up window ought should appear on the screen.
  3. To run the following command, enter the text after typing it:
  • bcdedit /set “default” no recovery enabled

Fixing the "Preparing Automatic Repair" Loop in Windows 10

4. If the command wasn’t successfully executed, try the next one and press Enter to run it instead:

  • bcdedit /set recoveryenabled no for “current”

Fixing the "Preparing Automatic Repair" Loop in Windows 10

5. Turn off automated repairs at startup

6. If the boot loop still occurs after making this adjustment, restart your computer and check.

Related: Fix: Why Doesn’t My Apple TV Remote Work?

Method 5. Run the Fixboot and Chkdsk commands

Use the fixboot command to force your machine to boot and perhaps resolve startup problems. You can use this to try to bypass the automatic repair so that your system will start up.

Continue with the procedures and try running Check Disk to repair your computer if the fixboot command didn’t work. The chkdsk command makes an effort to locate and fix disc problems, which could assist you in fixing the current boot loop issues.

  1. When your computer boots up, hold down the F8 key on your keyboard to access the Windows Recovery Environment (WinRE). You might also need to keep holding down the Fn (function) key on some devices.
  2. Go to Troubleshoot > Advanced options > Command Prompt from the Choose an option screen.
  3. To run the following command, enter the text after typing it: chkdsk C: /r

Fixing the "Preparing Automatic Repair" Loop in Windows 10

4. Attend to the scan’s conclusion. Try the following command if there was a problem or the scan couldn’t be completed: fixboot

Fixing the "Preparing Automatic Repair" Loop in Windows 10

Final Thoughts

Loops in Windows Automatic Repair can be a troublesome issue. The causes, solutions, and what to do if your machine won’t boot into Windows at all have all been covered in this article.

Do not hesitate to get in touch if you have any queries or need assistance with these suggestions. We’re pleased to respond to any questions you have about technology. Every day of the week, you can reach us by phone, live chat, or email.

When you sign up for our email, you’ll get early access to our blog posts, specials, and discount codes! At SoftwareKeep, you’ll receive the greatest pricing on all of our items. Want us to write more articles? For more frequently updated tech articles, visit our blog page!

Total
0
Shares
Previous Article
apple tv remote not working

Fix: Why Doesn't My Apple TV Remote Work?

Next Article
how to fix black screen in mac

How to Fix the Black and Unresponsive MacBook Screen in 5 Steps

Related Posts